Powerful, robust cordless pipe and tube bender
for hard, half-hard and soft copper tubes, also thin-walled,
Ø 10–28 mm, coated soft copper tubes, also thin-walled,
Ø 10–18 mm, stainless steel tubes of pressfitting systems Ø 10–18 mm, pipes of pressfitting systems made of carbon steel, also coated, Ø 12–28 mm, soft precision steel tubes Ø 10–28 mm, steel pipes DIN 2440 Ø 1/4 –1/2”, conduit DIN EN 50086 Ø 16–25 mm, composite tubes
Ø 14–32 mm, and others. 

• For cold bending of hard, half-hard and soft pipes and tubes, up to 180°. Cordless. Can be used anywhere.
• Bender cost recovered after a small number of bends.
• Compact, handy, super light, drive unit with battery only 9 kg.
• Simple, effortless, fast working. Fast and creep speed operation with immediate stop and angle scale 0–180° provided on each bending former ensure precise bending. No setting, no tools necessary.
• With integral absorbtion of torque during bending (Patent DE 39 03 041, Patent US 5,056,347).
• Robust, maintenance-free gear with safety slipping clutch in both directions. For long service life.
• Proven, powerful battery motor 18 V, 500 W. Right and left-hand rotation. With safety tip switch.
• Li-Ion-Technology: Battery Li-Ion 18 V, 2.6 Ah. Low weight. High energy density for approx. 50 % more bendings. Overheating and overloading protection by temperature monitor (NTC). Rapid charger for short charging times (1 h). No memory effect for maximum battery performance.

Powerful, robust electric pipe and tube bender
for hard, half-hard and soft tubes, also thin-wall, Ø 10–35 mm,
3/8–11/8”, coated soft copper tubes, also thin-wall, Ø 10–18 mm, stainless steel tubes of pressfitting systems Ø 12–28 mm, pipes of pressfitting systems made of carbon steel, also coated, Ø 12–28 mm, soft precision steel tubes Ø 10–30 mm, steel pipes DIN 2440
Ø 1/4–3/4”, conduit DIN EN 50086 Ø 16–32 mm, composite tubes
Ø 14–40 mm, and others. Up to 180°.

• Universal for many pipes and tubes.
• Bender recovered after a small number of bends through savings on fittings.
• Compact, handy, super light, drive unit only 8 kg (17.6 lbs). 
• Angle scale 0 to 180°. 
• Fast and creep speed operation for precise
  bending.
• With integral absorbtion of torque during bending (Patent DE 39 03 041, US-Patent 5,056,347).
• Maintenance-free gear with safety
  slipping clutch.
• Proven, powerful universal motor 230 V, 1000 W, with 30 % power increase thanks to automatic carbon brush adjustment.

Powerful, robust electric pipe and tube bender
for steel pipes DIN EN 10255 (DIN 2440) Ø 1/4–11/4”, hard, half-hard and soft copper tubes, also thin-wall, Ø 10–42 mm, stainless steel tubes of pressfitting systems Ø 12–42 mm, composite tubes 14–50 mm, pipes of pressfitting systems made of carbon steel, also coated, Ø 12–28 mm, soft precision steel tubes Ø 10–30 mm, conduit DIN EN 50086 Ø 16–32 mm, and others.  

• For cold bending of hard, half-hard and soft pipes and tubes, up to 90°. 
• Bender cost recovered after a small number of bends. 
• Simple, effortless, fast working. 
• Fast and creep speed operation and angle scale provided on each bending former ensure precise bending. Swan-neck, U-bends possible.
• With integral absorbtion of torque during bending (Patent DE 39 03 041, Patent US 5,056,347).  · Robust, maintenance-free gear with safety slipping clutch. 
• Proven, powerful universal motor 1000 W, with 30 % power increase thanks to automatic carbon brush adjustment. With stepless electronic safety switch. 
• Bending formers and back formers ROLLER’S Arco 50 (Ø 35 R100 to Ø 50 R140): Form and pressure resistant bending formers in ductile iron.
  

Robust hand tube bender
for hard, half-hard and soft copper tubes, also thin-wall,
Ø 10–22 mm, 3/8–7/8", coated soft copper tubes, also thin-wall, Ø 10–18 mm, stainless steel tubes of pressfitting systems Ø 12–18 mm, pipes of pressfitting systems made of carbon steel Ø 12–22 mm (coated up to Ø 18 mm), soft precision steel tubes Ø 10–20 mm, conduit DIN EN 60423 Ø 16–20 mm, composite tubes Ø 14–32 mm, and others. Up to 180°.

• Universal use, in parallel vice or free-hand as double-hand-bender. 
• Bender recovered after a few bends through savings on fittings.
• Only one type of bending formers for ROLLER’S Arcus and ROLLER’S Arco.
• Easy bending through long levers.

Robust, compact single-hand tube bender
for soft copper tubes Ø 10–22 mm, 3/8–7/8”, s up to 1 mm, coated soft copper tubes Ø 10–18 mm, 3/8–5/8”, s up to 1 mm, pipes of pressfitting systems made of carbon steel Ø 12–18 mm, soft precision steel tubes Ø 10–18 mm, s up to 1 mm, multi-layer composite tubes
Ø 14–32 mm. 

• Only 1 bender drive for the complete work range up to Ø 32 mm.
• Handy and light, only 1.3 kg (2.9 lbs). 
• Bender recovered after a few bends through savings on fittings.
• Marked bending formers for exact bending
• Fast operation through patented quick-acting feed forward and release (Patent DE 3803128, US-Patent 4,989,441).